Racerstar & Airbot airF7 F722 Flight Controller 5V/3A 9V/3A BEC w/OSD For FPV Racing RC Drone

Description:
Brand: Racerstar & Airbot 
MCU: F722

Flash: 128Mb(16MB)

BEC: 1 +1

UART:  6

OSD: AB7456

BT: Yes(optional)

VTX Power Siwtch: Yes

Mounting Holes: M4/30.5x30.5mm

Overview:

airF7 combins the most useful features for FPV on one board.It using F722 MCU with ICM gyro for the best performance, the soft mount grommets plus speical designed filiter Circuit bring you the most "MPU6000 listability with ICM responding speed.

Highlight:

• Speical designed filiter system "Good Dream", will reduce most noise from power line

• Modular design, many PNP modules is coming, different BEC/BT/Receiver could be mounted on without ext. wires

• Highside video power switch function, cut off the VTX and camera power like real switch

• 6x Hardware UART + 1 independent I2C, every function one independent port, no more Multiplexing

• Airbot Configuration assistant supported, easier to config the functions for the FC

• Supported by EMUflight

Features:

• STM32F722 MCU

• AB7456 OSD onboard

• 128mb(16MB) Flash for blackbo

• ICM Gyro

• 5V 3A BEC / 9V 3A BEC(optional)

• BT module supported(optional)

• Receivers could be pluged and mounted direct on the FC(Frsky RXSR-FC and Cross fire RX)

• Highside video power switch

• Build in power filter system for main power and VTX/Camera power

• 6 UART

• 1x independent I2C(not need to share UART3)

• Independent 3.3v power source for senors and digital device

• "Strong pad" design, all solder pads has spare or through holes, no worry about ripped off solder pads

Package Included:
1 X airF7 FC