• Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current Voltage Sensor
  • Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current Voltage Sensor
  • Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current Voltage Sensor
  • Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current Voltage Sensor
  • Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current Voltage Sensor
  • Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current Voltage Sensor
Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current Voltage Sensor

Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current Voltage Sensor

US$36.58
40.58
10% off
  • Description
  • Reviews(69)

Racerstar Shot30A ESC 30A 30amp 3-6S 4 in 1 BLHeli_S BB2 Dshot600 Integrated Current Voltage Sensor

The Racerstar Shot30A 4in1 ESC 4x30A runs the newest BLHELI_S firmware, supports Dshot/ Multishot/ Oneshot42/ Oneshot125, it offer the best performance in 35x35mm size, integrated current and voltage sensor.

Works up to 30A each motor.

 

Description:

Brand: Racerstar 

Item name: Shot30A BLHeli_S ESC

Size: 36x36mm

Mounting holes: 30.5x30.5mm M3
Weight: 10g

MCU: BB21, 48Mhz Runs BLHELI_S J_H_xx firmware

Input voltage: 3-6S lipo

4PWM input

Con. Current: 30A

Peak Current: 35A (10S)

BEC: 5V 3A 

Integrated Current and Voltage sensor

NO External capacitors needed

Compatible for Omnibus F3 F4, easy to assembly a Fly-tower with it.

 

Features:

BLHeli_S is designed for superior performance in FPV Racing, and uses hardware generated motor pwm for smooth throttle response and silent operation.

The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us) and D-shot.

The input signal is automatically detected by the ESC upon power up.

All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.

The code supports features to prevent sync loss. There are tune-able parameters that can make the code run well even in the most demanding situations, although default settings will work.

Excellently in normal operating environments.

The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.

 

Package include:

20 x Racerstar Shot30A 4 in 1 ESC 

40 x Cable

80 x M3 Nylon screws

160 x M3 Nylon column

80 x M3 Nylon nut

Customer Reviews

Average Rating:

( Review)

There is no review yet. You can write the first review in your order list.